TRADE BOARD | DIRECTORY | REGISTRATION | SERVICES | CONTACT US | ABOUT US  

DELUX MODEL GLUE SPREADER (JAMUNA ENGINEERING COMPANY)

Its salient features are as follows:

It is equipped with Nuprin rubber rollers. It has heavy duty reduction gears. Its threading life is double. The body of the glue spreader is heavy. The brackets of the spreader are made of castings. It is single shaft-driven. The accurate gripping of the rollers of the new glue spreader enables uniform spreading of the glue. No sign of glue lining appears at the end-edges of the board and the ply.

VENEER DRYER (KALYAN INDUSTRIES)

The machine with all its  uprights which hold the pipe rollers through C.I. Bushes are of 75x40 mm. Channel and are thus of heavy duty construction. To match with Heavy Channels the C.I.  bushes are also made bigger in size which increase the durability. All the insulation boxes on the sides, roof and door are provided with intermediate baffle sheets to eliminate sliding of the Glass Wool Downwards. It has been practically experienced that due to continuous use the glass Wool tends to shift downwards leaving hollow cavity on the top from which tremendous heat is lost, which ultimately bring down the efficiency of the dryer. The Axilal Flow fans are made from Special Aluminium Alloy and are dynamically balanced. The Axial Flow fans are directly mounted on the motor shafts, thus eliminating the use of V-Belts. Resulting in easy operation and lower maintenance cost. Dryer is provided with latest Electronics Gadgets. Variable Speed Box (Dyno Drive) is provided to give trouble free service and easy control of speed variation.



 

LOG PEELING LATHE MACHINE (KALYAN INDUSTRIES)

The machine is manufactured in 4 models:Model K.I
                                                             Model K.I.C
                                                             Model:K.I.I
                                                             Model K.I.C.C
The machine is a strong compact structure, great precision of construction, highly automatic, practical and safe operation.
THE MAIN BODY
The main frame of log peeling lathe is fabricated from heavy plates with stress relieved. The work spindle and drive system are housed in the spindle heads on both sides of main body. All the spindle drive gears are Helical and hobcut or by quadruplex chain which ensure smooth running of the machine to produce fine Veneer free from brakes and cracks, Provision for the automatic lubrication to all the moving part are given. Knife carriage of the machine is very rigid which prevents any sort of bending or vibration of the Peeling Knife.



 

TELESCOPE MULTIPLEX  SPINDLES (GURU AMAR INDUSTRIES)

Telescopic multiplex spindles with back-up rolls system controlled with hydraulic and pneumatic powers. The length of the knife of this machine is 1500mm in length. The  maximum diameter of the swing is 1000mm. The length of the minimum block is 800 mm. The minimum diameter of the core is 80 mm. The maximum rpm of the spindle is 100. The approximate weight of the machine is 5500 kg. The Veneer thickness of the machine is 0.75mm upto 3.5mm (for all models 1000 x 1500) and 0.35mm upto 3.5mm (for all models 1500 x 2750) in 18 combination of setting.





 

HYDRAULIC CONTROLLED (GURU AMAR INDUSTRIES)

Hydraulic controlled with back-up roll system for high quality veneer, high recovery and economically beneficial. The length of the knife is 2100mm. The maximum diameter of the swing is 1200mm. The length of the minimum block is 1500mm. The minimum diameter of the core is 100mm. The maximum rpm of the spindle is 80. The approximate weight of the machine is 8000 kg. The Veneer thickness of the machine is 0.75mm upto 3.5mm (for all models 1000 x 1500) and 0.35mm upto 3.5mm (for all models 1500 x 2750) in 18 combination of setting.




 

MANUALLY CONTROLLED (GURU AMAR INDUSTRIES)

Manually controlled without back-up roll system for all levels multi-purpose veneer lathe. The length of the knife is 2750mm. The maximum diameter of the swing is 1500mm. The length of the minimum block is 1900mm. The minimum diameter of the core is 130mm. The maximum rpm of the spindle is 80. The approximate weight of the machine is 15000 kg. The Veneer thickness of the machine is 0.75mm upto 3.5mm (for all models 1000 x 1500) and 0.35mm upto 3.5mm (for all models 1500 x 2750) in 18 combination of setting.




 

NEXT>>